Potato Chipper. Despite its compact dimensions, IMC’s CS-C1 Chipper has a market leading capacity and is able to process up to 25kg of potatoes in just one minute. It can be mounted on a drainer, worktop or stand and is manufactured from heavy gauge stainless steel to provide years of reliable service and superior performance whilst being simple to wipe down and clean.
The patented screw-down, quick-release knife block assembly ensuring blades remain rigidly in place to provide perfect chips with minimal wastage. Available in widths of 12mm, 14mm and 17mm, it can be removed quickly and easily for cleaning or replacement.
Capable of cutting 25kg of chips per minute with minimal waste
Easy to use, clean and maintain
Interchangeable knife blocks for choice of chip size
Interlocks for operator safety
Compact design for worktop mounting
Output 250kg per hour
Maximum capacity 25kg
This item comes complete with one knife block assembly. Size required will be confirmed at point of order.
Sizes available: 12mm x 12mm; 14mm x 14mm; 14mm x 17mm; 21mm x 17mm
Stands Available. https://hopkins.biz/product/potato-chipper-bespoke-stand/
Dimensions W 400 mm x D 692 mm x H550mm
Additional knife blocks can be ordered separately
24 Months Parts and Labour (Blades not included in warranty)
Compliments our Rocket Peeler, Eyeing Tank and Interceptor tank
RGM Hopkins Rocket Peeler https://hopkins.biz/product/hp25-56-hopkins-potato-peeler/
RGM Hopkins Eyeing Tank https://hopkins.biz/product/eyeing-tank-hopkins/
Using your own potato chipper ensures you have the freshest product when making in house balanced against using frozen or pre-prepared chips
Is the machine easy to install?
Yes, all you need is a standard 13amp three pin socket.
Can I cut French Fries?
No, the smallest chip size available is 12mm x 12mm
If the belt breaks can I replace it myself?
Yes, the belt can be changed quite easily. Unplug the chipper then remove the hopper, block and rotor. Then turn upside down and remove base. Loosen motor fixings to allow movement in. Replace with new belt and adjust tension then tighten motor back up and rebuild.
Are the blades easy to change?
Yes, firstly remove block from machine. Then undo the two screws on the block. This will then release the blades. Replace blades and rebuild. However always use caution when handling the sharp blades.